SPARX Three Phase Fitting Instructions

12v Three Phase Regulator Rectifier Fitting Instructions

Simply connect the 3 output wires from the 3 phase stator to the 3 yellow AC wires of your SPARX box, The Red + and the Black – then connect into your motorcycle wiring.


**Single & Three phase boxes***
Due to the sensitive nature of both the single and three phase boxes it is VERY important to fit spark plug caps of the 5000ohm resisted type.
Failure to do so will cause overloading.


Tech help

For Technical help call your stockist

SPARX Electrics are designed to give reliability and a higher output than standard Items especially at the lower rev ranges. Why not upgrade your motorcycle electrics today.

SPARX 3 phase ‘POWER BOX’ regulator rectifier

Enhance your electrics with the FULL Three phase 210 Watt Alternator kit !

Please Note …

When using SPARX regulator rectifiers you must use resisted spark plugs as circuitry is sensitive. Using unresisted plugs can cause over charging.

+ 44 ( 0 ) 1432 820 752
or Fax : + 44 ( 0 ) 1432 820 752

N.B. Part numbers are for reference only and does not imply that parts are OE Triumph manufacture.

This site shows the parts we make and source ourselves. We also have thousands of items from other sources which we will be adding to the site as soon as possible.